KIASET Mechanical Keyless Door Lock Double Sided Keypad Push Button Combination Lock with Lever Handle, Black LK420DB

March 12, 2020 - Comment

HOW DO I SWITCH LOCK HANDING? 1. Remove screw from backside of lever handle. 2. Switch lever handle direction. Note: levers should point towards the door hinges. 3. Replace screws. Please reference photo #3 HOW DO I CHANGE THE CODE? The code combination can be easily changed in just a few seconds. All you need

Buy Now! $113.84Amazon.com Price
(as of April 9, 2020 7:02 pm UTC - Details)

HOW DO I SWITCH LOCK HANDING?
1. Remove screw from backside of lever handle.
2. Switch lever handle direction. Note: levers should point towards the door hinges.
3. Replace screws. Please reference photo #3

HOW DO I CHANGE THE CODE?
The code combination can be easily changed in just a few seconds. All you need is a slotted screwdriver. Rotate little dot on the code to face the number to create your desired combination. Please reference photo #4

HOW MANY DIGITS CAN I ENTER IN THE CODE?
12-button keypad. 11 buttons for code selection, plus “C” button. To unlock, press “C”, then enter you code. For example, if the code is 1234, press C1234.

DOES THE CODE COMBINATION NEED TO BE IN THE EXACT ORDER?
No. The code is non-sequential, they can be entered in any order. DO NOT set repeating number in the code.
For example, if the code is 1234, then 4321, 2341 are also valid code, but 1123 is not.

HOW DO I INSTALL THIS LOCK?
1. Need to drill additional 2 screw holes into your door according to the installation drawing.
2. Change lock handing.
3. Set up the code BEFORE installing the lock.
4. The spring loaded spindle will fit wooden doors or metal doors thickness within 1-3/8 inch to 2-3/8 inch. The spring keeps the spindle firmly engaged in the outside handle when the lock is assembled on the door.
5. Cut the fixing bolts to suit the door thickness. Note that the bottom fixing bolt will be longer than the top.
6. Hold the lock case and the back plate, with the rubber seals in place, onto the door with the spindle in position. Using the fixing bolt screw everything together.

WHAT LOCK BOX I WILL NEED FOR A STEEL GATE?
Item # “B07R45DM3Y”.

PLEASE NOTE: The lock rubber seal is 2-inch wide, it is NOT wide enough to cover the standard sized single bore hole (2-1/8″). Need to make a patch to cover the bore hole.

Product Features

  • PLEASE NOTE: This lock is NOT wide enough to cover the standard sized single bore hole (2-1/8″). Need to make a patch to cover the bore hole.
  • REVERSIBLE LEVER works on both right handed and left handed doors. For wooden door or metal door thickness within 1-3/8 inch to 2-3/8 inch. Latch features a FIXED backset to fit 2-3/8 inch.
  • EASY TO SET OR RESET CODE: the biggest advantage of this KIASET lock is easy to re-code, you don’t even have to unscrew the backplate. You can personalize your combo between one digit to ten digits (no repeat), and these numbers an be entered in any order. Recommend four digits at least.
  • SECURITY AND CONVENIENCE: The code combination is required to lock and to unlock from both sides. It automatically locks when you shut the door. Making it easier for you to get inside your house safely and quickly every time.
  • NO RISK OF BEING LOCKED OUT: non-electronic parts. You don’t need to worry about batteries die or the power failure.

Comments

Write a comment

*