Install Essentials 451M Dooor Lock Relay Module
November 15, 2018 - Comment
Install Essentials 451M Door Lock Relay Module Product Features Re-wired door lock relay assembly that comes with resistors for some new-model vehicles Compatible with most Directed Electronics systems Door Lock Relay Module Re-wired door lock relay assembly that comes with resistors for some new-model vehicles Compatible with most Directed Electronics systmes
){kind=link}
Makes Adding Power Locks EASY! Usually to add power locks as an after market modification you need two standard relays, one for up (positive power) and one for down (reverse polarity). This 451M makes it easy to wire because is is basically two relays in one simple package. It comes with easy to follow instructions and when used with remote key entry systems and/or spring loaded switches works like a charm. One note: I’m very good with electronics and could not figure out how to make it work properly with a 5 wire actuator…
Convenient to add Remote Keyless Entry to my Crown Victoria Police Interceptor This module was chosen over an implementation with two separate relays for simplicity and size. This module fit nicely into the front passenger door handle of my Crown Victoria Police Interceptor (CVPI), wired into the door lock/unlock buttons. It includes a two-wire cable to the Remote Keyless Entry controller. I passed this cable through the door cable boot to where I installed the controller under the glove compartment. The connector on this module mated directly to my (Scytek A20)…
Works just as it should, easy install! Comes with easy to follow directions and wires right up to the Viper alarm system- you will need this if you have aftermarket door lock actuators like in a hot rod.