Car Remote Central Lock Locking Keyless Entry System with Remote Controllers
Flashing alert. LED indicator. Suitable for all types of vehicles. Specifications: Voltage: +12V ± 2V(DC) Static current: ≤8mA Max current: 15A Direction output: ≤15A Central lock output: ≤15A Truck output: ≤-500mA Frequency: 315MHz Item size: 8.5 * 7 * 2cm Net weight: 232g Package including: 1 * Keyless Entry System 2 * Remote Controllers 1
Flashing alert.
LED indicator.
Suitable for all types of vehicles.
Specifications:
Voltage: +12V ± 2V(DC)
Static current: ≤8mA
Max current: 15A
Direction output: ≤15A
Central lock output: ≤15A
Truck output: ≤-500mA
Frequency: 315MHz
Item size: 8.5 * 7 * 2cm
Net weight: 232g
Package including:
1 * Keyless Entry System
2 * Remote Controllers
1 * Wire
1 * User Manual
Product Features
- Remotely lock and unlock your car.
- Remote car location.
- Remotely release the boot/trunk.
- Learning code remote controls.
- Electric lock and air lock.
Couldn’t build it for less Pros:- Inexpensive (under $20 shipped)- Truly universal- Key fobs are better than any OE remotes I’ve worked with (EE at tier 1 OEM automotive supplier)- 100+ft range, line-of-sight- Module is very small – installed in the door panel of my 2000 Crown Victoria Police Interceptor.Cons:- Wiring harness has thick-insulated 22 gauge fine stranded wires. Expected 18 gauge given current rating (15A)- Range is less than 300ft (does not matter for my…
Really, Really Cool! Took about a week to ship. Not bad at all. As people before me ave said: it is difficult to install. The instruction book has a wiring diagram with 4-5 different examples of how your cat MAY be wired. If you don’t understand wiring diagrams, and are not willing to experiment, don’t use this product. I have a ’95 Jeep Grand Cherokee. All I did was remove the door cover on the driver’s side. I found the constant positive and patched 3 wires into it. The connected to corresponding wires to the…
Worked fine on my 2000 Honda Civic EX Some might wonder why I’m installing this in a Civic EX since they come with a keyless entry. Well the previous owner managed to jack up the keyless entry in a mangled stereo install and the OEM components to replace it are way too expensive to put back in. So, I decided to give this a try and it worked just fine. For those wondering on the wiring I did the following using the wiring under the driver side kick panel (KES is the wires on the Keyless entry system):KES – White…